Nodes 3
Generative Motion Graphics Plug-In
Compatibility
Nodes 3 is compatible with Final Cut Pro, Motion, Premiere, After Effects and DaVinci Resolve.
Generative Motion Graphics Plug-In
Nodes 3 is compatible with Final Cut Pro, Motion, Premiere, After Effects and DaVinci Resolve.
Presets contain a snapshot of your effect configuration. 304 built-in presets are available.
When you save parameter configuration to a file on disk, this file can later be loaded to recreate the same effect configuration. Presets generated in one video application can be used by the same plug-in running in a different video application.
Working with the Presets BrowserSet to 100% by default.
On by default.
Off by default.
Off by default.
Off by default.
The following options are available:
The following options are available:
The following options are available:
Set to 0 by default.
The slider is limited to values between 0 and 1000 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
The following options are available:
Off by default.
Set to 10 by default.
The slider is limited to values between 0 and 100 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 10 by default.
The slider is limited to values between 0 and 50 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 10 by default.
The slider is limited to values between 0 and 50 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 10 by default.
The slider is limited to values between 0 and 50 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Angle set to 0° by default.
The following options are available:
On by default.
The following options are available:
Set to 0 by default.
The slider is limited to values between 0 and 20 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
The following options are available:
Set to 0 by default.
The slider is limited to values between 0 and 20 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
The following options are available:
Set to 0 by default.
The slider is limited to values between 0 and 20 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
The following options are available:
Set to 0 by default.
The slider is limited to values between 0 and 20 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 60 by default. Only values between 0 and 180 are allowed.
The following options are available:
A point parameter centered in the frame by default.
While it is possible to change the X and Y coordinates via the inspector, it is far easier to interact with point parameters directly on-screen:
Adjusting Point Parameters in Final Cut ProSet to -1400 by default.
The slider is limited to values between -5000 and 1000 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Angle set to 0° by default.
Angle set to 0° by default.
Angle set to 0° by default.
A point parameter centered in the frame by default.
While it is possible to change the X and Y coordinates via the inspector, it is far easier to interact with point parameters directly on-screen:
Adjusting Point Parameters in Final Cut ProSet to 0 by default.
The slider is limited to values between -1000 and 1000 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
The following options are available:
Angle set to 0° by default.
Angle set to 0° by default.
Angle set to 0° by default.
Set to 1 by default.
The slider is limited to values between 0 and 5 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
A button whose action is performed when a new output frame is produced by the effect.
The following options are available:
Lets you provide additional media to the effect.
When no media has been assigned to this parameter, it default to the following placeholder:
The user interface varies by host:
Drop Zones in Final Cut ProThe following options are available:
Off by default.
Set to 8 by default.
The slider is limited to values between 1 and 20 but you can type values between 1 and 100 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 0.6 by default. Only values between 0 and 1 are allowed.
Set to 40 by default.
The slider is limited to values between 0 and 1000 but you can type values between 0 and 200000 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 10 by default.
The slider is limited to values between 1 and 40 but you can type values between 1 and 10000 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 10 by default.
The slider is limited to values between 1 and 40 but you can type values between 1 and 10000 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 1 by default.
The slider is limited to values between 1 and 40 but you can type values between 1 and 10000 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 3 by default.
The slider is limited to values between 3 and 36 but you can type values between 3 and 128 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 8 by default.
The slider is limited to values between 2 and 300 but you can type values between 2 and 3000 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 200 by default.
The slider is limited to values between 0 and 1000 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 0° by default.
Set to 400 by default.
The slider is limited to values between 0 and 1000 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 1000 by default.
The slider is limited to values between 0 and 2000 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 500 by default.
The slider is limited to values between 0 and 1000 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 1 by default.
The slider is limited to values between 0 and 10 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Angle set to 0° by default.
Set to 500 by default.
The slider is limited to values between 0 and 2000 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 50 by default.
The slider is limited to values between 0 and 1000 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 50 by default.
The slider is limited to values between 0 and 1000 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 50 by default.
The slider is limited to values between 0 and 1000 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
The following options are available:
Set to 0 by default.
The slider is limited to values between 0 and 10 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 0 by default.
The slider is limited to values between 0 and 10 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
A number that controls random aspects of the effect.
Click the button to assign a new seed value. When the seed value is changed, the effect uses a different random sequence to produce a different output.
Edit the existing value to manually assign a seed number. This may help you replicate a particular sequence of random events. In Final Cut Pro and Motion, hold down the Option ⌥ key to access the button in the inspector.
Set to 0 by default.
The slider is limited to values between 0 and 1000 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
The following options are available:
Off by default.
Angle set to 0° by default.
Angle set to 360° by default.
Angle set to 0° by default.
Set to 0% by default.
Off by default.
Off by default.
Off by default.
Set to 0.5 by default. Only values between 0 and 1 are allowed.
Set to 0 by default.
The slider is limited to values between 0 and 2000 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
On by default.
The following options are available:
Set to 0 by default.
The slider is limited to values between 0 and 500 but you can type values between 0 and 50000 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
The following options are available:
Off by default.
The following options are available:
The following options are available:
The following options are available:
Lets you configure a list of Geometry Definition File Format files.
Click the button to populate the list through a configuration window. The window allows you to add, remove and rearrange Geometry Definition File Format files. The effect processes your files in the same order in which they appear in the list.
The configuration window also provides shortcuts to edit each file using a separate application or reveal its location in the Finder. If a file is reported as missing, as when its path on disk has changed, click the button to specify its new location.
The following options are available:
The following options are available:
Set to 1 by default. Only values between 0 and 1 are allowed.
Set to 1 by default. Only values between 0 and 1 are allowed.
Set to 2 by default. Only values between 2 and 64 are allowed.
Set to 0.16 by default. Only values between 0 and 1 are allowed.
Set to 1 by default. Only values between 0 and 1 are allowed.
Set to 0.14 by default. Only values between 0 and 1 are allowed.
Set to 65% by default.
Set to 1 by default. Only values between 0 and 1 are allowed.
Set to 35% by default.
Set to 0.17 by default. Only values between 0 and 1 are allowed.
Set to 0.06 by default. Only values between 0 and 1 are allowed.
The following options are available:
Set to 0.87 by default. Only values between 0 and 1 are allowed.
Set to 0.66 by default. Only values between 0 and 1 are allowed.
Set to 88% by default.
Set to 0 by default. Only values between 0 and 1 are allowed.
Set to 40% by default.
Set to 0 by default. Only values between 0 and 1 are allowed.
Set to 0 by default.
The slider is limited to values between 0 and 100 but you can type values between 0 and 4000 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 100% by default.
The following options are available:
Set to 100% by default.
Lets you configure a list of image and video files.
Click the button to populate the list through a configuration window. The window allows you to add, remove and rearrange image and video files. The effect processes your files in the same order in which they appear in the list.
The configuration window also provides shortcuts to edit each file using a separate application or reveal its location in the Finder. If a file is reported as missing, as when its path on disk has changed, click the button to specify its new location.
The following options are available:
Set to 10 by default.
The slider is limited to values between 0 and 100 but you can type values between 0 and 20000 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 20 by default.
The slider is limited to values between 0 and 200 but you can type values between 0 and 20000 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 2 by default.
The slider is limited to values between 1 and 100 but you can type values between 1 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 1 by default.
The slider is limited to values between 0 and 100 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Angle set to 0° by default.
Set to 1 by default. Only values between 0 and 1 are allowed.
The following options are available:
The following options are available:
Set to 80% by default.
Set to 1 by default.
The slider is limited to values between 0 and 100 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 0.5 by default. Only values between 0 and 1 are allowed.
Set to 0.33 by default. Only values between 0 and 1 are allowed.
Set to 100% by default.
Set to 100% by default.
Set to 0% by default.
On by default.
The following options are available:
The following options are available:
The following options are available:
The following options are available:
The following options are available:
Set to 0 by default.
The slider is limited to values between 0 and 100 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
A point parameter centered in the frame by default.
While it is possible to change the X and Y coordinates via the inspector, it is far easier to interact with point parameters directly on-screen:
Adjusting Point Parameters in Final Cut ProSet to 1000 by default.
The slider is limited to values between -1000 and 2000 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Off by default.
Set to 200 by default.
The slider is limited to values between 1 and 500 but you can type values between 1 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 0 by default.
The slider is limited to values between 0 and 10 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 1 by default.
The slider is limited to values between 1 and 100 but you can type values between 1 and 10000 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 0 by default. Only values between 0 and 1 are allowed.
The following options are available:
Off by default.
The following options are available:
Off by default.
Set to 300 by default.
The slider is limited to values between 0 and 1000 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 200 by default.
The slider is limited to values between 0 and 1000 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Angle set to 0° by default.
Angle set to 0° by default.
The following options are available:
The following options are available:
Set to 300 by default.
The slider is limited to values between 0 and 2000 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 0 by default.
The slider is limited to values between 0 and 1000 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Angle set to 0° by default.
Off by default.
Set to 500 by default.
The slider is limited to values between 0 and 2000 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 1000 by default.
The slider is limited to values between 0 and 2000 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 500 by default.
The slider is limited to values between 0 and 2000 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Angle set to 0° by default.
Set to 500 by default.
The slider is limited to values between 0 and 2000 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 500 by default. Only values between 0 and 2000 are allowed.
Set to 500 by default. Only values between 0 and 2000 are allowed.
A number that controls random aspects of the effect.
Click the button to assign a new seed value. When the seed value is changed, the effect uses a different random sequence to produce a different output.
Edit the existing value to manually assign a seed number. This may help you replicate a particular sequence of random events. In Final Cut Pro and Motion, hold down the Option ⌥ key to access the button in the inspector.
The following options are available:
Off by default.
Set to 1 by default.
The slider is limited to values between -10 and 10 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Angle set to 0° by default.
Set to 0 by default.
The slider is limited to values between 0 and 5 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 30 by default.
The slider is limited to values between 1 and 10000 but you can type values between 1 and 20000 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Off by default.
The following options are available:
The following options are available:
The following options are available:
The following options are available:
Set to 3 by default.
The slider is limited to values between 1 and 100 but you can type values between 1 and 10000 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 10 by default.
The slider is limited to values between 1 and 100 but you can type values between 1 and 1000 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 10 by default.
The slider is limited to values between 1 and 100 but you can type values between 1 and 10000 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 3 by default.
The slider is limited to values between 0 and 36 but you can type values between 0 and 128 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 2 by default.
The slider is limited to values between 2 and 32 but you can type values between 2 and 3000 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 500 by default.
The slider is limited to values between 0 and 1000 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 0 by default.
The slider is limited to values between 0 and 100 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Angle set to 0° by default.
Angle set to 360° by default.
Angle set to 0° by default.
Set to 0% by default.
The following options are available:
Set to 500 by default.
The slider is limited to values between 0 and 1000 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 1000 by default.
The slider is limited to values between 0 and 2000 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 1 by default.
The slider is limited to values between 0 and 10 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Angle set to 0° by default.
Off by default.
Off by default.
Set to 2 by default.
The slider is limited to values between 1 and 10 but you can type values between 1 and 10000 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 1 by default.
The slider is limited to values between 1 and 10 but you can type values between 1 and 10000 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 1 by default.
The slider is limited to values between 1 and 10 but you can type values between 1 and 10000 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 500 by default.
The slider is limited to values between 0 and 5000 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 500 by default.
The slider is limited to values between 0 and 5000 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 500 by default.
The slider is limited to values between 0 and 5000 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 500 by default.
The slider is limited to values between 0 and 10000 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
The following options are available:
Set to 0 by default.
The slider is limited to values between 0 and 10 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 0 by default.
The slider is limited to values between 0 and 10 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Off by default.
The following options are available:
Set to 1 by default.
The slider is limited to values between 0 and 5 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 1 by default.
The slider is limited to values between 0 and 5 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 0 by default. Only values between 0 and 1 are allowed.
A number that controls random aspects of the effect.
Click the button to assign a new seed value. When the seed value is changed, the effect uses a different random sequence to produce a different output.
Edit the existing value to manually assign a seed number. This may help you replicate a particular sequence of random events. In Final Cut Pro and Motion, hold down the Option ⌥ key to access the button in the inspector.
The following options are available:
Angle set to 0° by default.
Angle set to 0° by default.
Angle set to 0° by default.
The following options are available:
The following options are available:
Set to 1 by default.
The slider is limited to values between 1 and 1000 but you can type values between 1 and 199999 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
A point parameter centered in the frame by default.
While it is possible to change the X and Y coordinates via the inspector, it is far easier to interact with point parameters directly on-screen:
Adjusting Point Parameters in Final Cut ProSet to 0 by default.
The slider is limited to values between -1000 and 1000 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
A button whose action is performed when a new output frame is produced by the effect.
The following options are available:
Lets you edit text used by the effect. Set to the following by default:
0 20 22 23 24 ⮐ 0 32 34 36 42 40 41 39Click the button to modify the text through a separate window.
Set to 0 by default. Only values between 0 and 1 are allowed.
The following options are available:
Set to 30 by default.
The slider is limited to values between 0 and 1000 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 75 by default.
The slider is limited to values between 0 and 1000 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
The following options are available:
Set to 0 by default. Only values between 0 and 1 are allowed.
Set to 1 by default.
The slider is limited to values between 1 and 10 but you can type values between 1 and 10000 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 10000 by default.
The slider is limited to values between 0 and 10000 but you can type values between 0 and 1000000 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 0 by default. Only values between 0 and 5 are allowed.
A point parameter centered in the frame by default.
While it is possible to change the X and Y coordinates via the inspector, it is far easier to interact with point parameters directly on-screen:
Adjusting Point Parameters in Final Cut ProSet to 0.01 by default.
The slider is limited to values between -1000 and 1000 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
A button whose action is performed when a new output frame is produced by the effect.
The following options are available:
Off by default.
Set to 1 by default.
The slider is limited to values between 0 and 10 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 1 by default. Only values between 0 and 1 are allowed.
Off by default.
The following options are available:
The following options are available:
Set to 2.2 by default. Only values between 0 and 64 are allowed.
Set to 2.2 by default. Only values between 0 and 64 are allowed.
Set to 2 by default.
The slider is limited to values between 0 and 100 but you can type values between 0 and 1000 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 2 by default.
The slider is limited to values between 0 and 100 but you can type values between 0 and 1000 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 36 by default.
The slider is limited to values between 1 and 100 but you can type values between 1 and 6000 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 3 by default. Only values between 0 and 64 are allowed.
The following options are available:
Set to 0 by default. Only values between 0 and 1 are allowed.
Set to 0% by default.
Off by default.
Set to 0.1 by default. Only values between 0 and 1 are allowed.
Set to 0 by default.
The slider is limited to values between -500 and 500 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 0 by default.
The slider is limited to values between -500 and 500 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 0 by default.
The slider is limited to values between -500 and 500 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
On by default.
Set to 1 by default.
The slider is limited to values between -9 and 10 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 1 by default.
The slider is limited to values between -9 and 10 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 1 by default.
The slider is limited to values between -9 and 10 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 1 by default.
The slider is limited to values between -9 and 10 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 80% by default.
Set to 80% by default.
The following options are available:
The following options are available:
Set to 100% by default.
The following options are available:
The following options are available:
Set to 100% by default.
The following options are available:
The following options are available:
Set to 0 by default.
The slider is limited to values between 0 and 1000 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
The following options are available:
Set to 3 by default.
The slider is limited to values between 0 and 100 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 10 by default.
The slider is limited to values between 0 and 50 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 10 by default.
The slider is limited to values between 0 and 50 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 10 by default.
The slider is limited to values between 0 and 50 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Angle set to 0° by default.
Off by default.
On by default.
The following options are available:
Font parameter set to Helvetica by default. The first popup menu allows you to choose a font family. The second popup menu allows you to choose a typeface among those supported by the font:
Set to 16 by default.
The slider is limited to values between 0 and 50 but you can type values between 0 and 1000 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
The following options are available:
Set to 0 by default.
The slider is limited to values between 0 and 1 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
The following options are available:
The following options are available:
On by default.
The following options are available:
Set to 0 by default.
The slider is limited to values between -100 and 100 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 0 by default.
The slider is limited to values between -100 and 100 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 2 by default.
The slider is limited to values between -10 and 10 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
The following options are available:
Set to 80% by default.
Set to 1 by default.
The slider is limited to values between 0 and 100 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 0.5 by default. Only values between 0 and 1 are allowed.
Set to 0.33 by default. Only values between 0 and 1 are allowed.
The following options are available:
Set to 100% by default.
Set to 0% by default.
The following options are available:
The following options are available:
The following options are available:
Set to 0 by default.
The slider is limited to values between 0 and 100 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 1 by default.
The slider is limited to values between 1 and 10 but you can type values between 1 and 1000 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 100% by default.
The following options are available:
Set to 100% by default.
Lets you edit text used by the effect. Set to the following by default:
Treasure ⮐ Darius ⮐ Trevor ⮐ Terence ⮐ Nathan ⮐ Garrett ⮐ Eagle ⮐ Sullivan ⮐ Dakota ⮐ Odessa ⮐ Carolina ⮐ Valda ⮐ Isadora ⮐ Heaven ⮐ Johnson ⮐ Lennon ⮐ Connors ⮐ Everest ⮐ Gloria ⮐ Fisher ⮐ Cassius ⮐ Georgia ⮐ Vangelis ⮐ Haldor ⮐ Duke ⮐ Wayne ⮐ Fabia ⮐ Parson ⮐ Ivana ⮐ Flint ⮐ Roxanne ⮐ Edison ⮐ Easton ⮐ Barnes ⮐ Edgar ⮐ Maxine ⮐ Herman ⮐ Trinity ⮐ Lucky ⮐ Hannah ⮐ Ingrid ⮐ Chrystal ⮐ Warden ⮐ DavisClick the button to modify the text through a separate window.
Off by default.
The following options are available:
The following options are available:
Set to 70 by default.
The slider is limited to values between -2000 and 2000 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 220 by default.
The slider is limited to values between 0 and 4000 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Set to 85% by default.
The following options are available:
Set to -400 by default.
The slider is limited to values between -1000 and 1000 but you can type values between 0 and 0 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
The following options are available:
Set to 10 by default.
The slider is limited to values between 1 and 2000 but you can type values between 1 and 50000 by clicking on the current value in the inspector and typing the desired value in. Some video applications also allow you to click and drag the value beyond the range accessible through the slider.
Controls anti-aliasing quality of any 3D content generated by the effect.
Enables motion blur at different quality settings. The higher the quality, the more samples are used. Multiple samples are blended together to produce a single frame of output.
The Shutter Angle slider controls the size (aperture) of the shutter used to simulate motion blur. The size of the shutter determines how long light is allowed to pass through the lens. The angle is set to 180° by default. A shutter angle of 360° means that samples are collected for the entire duration of the frame.
Setting a value of zero means that you want the shutter to collect light only once, which is equivalent to turning motion blur off.
The Shutter Offset slider controls the moment in time when the shutter opens and closes, relative to the duration of the frame. The offset is set to 0 by default. An offset of zero means the shutter is perfectly centered over the moment in time when the frame occurs. The shutter is therefore open an equal amount of time before and after the current frame occurs.
The Shutter Angle and Shutter Offset parameters are only available when motion blur is enabled.
A point parameter centered in the frame by default.
While it is possible to change the X and Y coordinates via the inspector, it is far easier to interact with point parameters directly on-screen:
Adjusting Point Parameters in Final Cut ProThe following options are available:
The following options are available:
A number that controls random aspects of the effect.
Click the button to assign a new seed value. When the seed value is changed, the effect uses a different random sequence to produce a different output.
Edit the existing value to manually assign a seed number. This may help you replicate a particular sequence of random events. In Final Cut Pro and Motion, hold down the Option ⌥ key to access the button in the inspector.